Free ground shipping to the lower 48 US States on most mini-excavator thumbs!
This kit comes with everything needed to install a thumb on your Kubota machine and get to work.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Appropriate for the Kubota KX71, KX91, KX121, KX033, KX040, and U35 mini excavators using the Kubota factory quick attach system. If you do not use the factory Kubota quick attach, please contact us to make sure we get the right thumb for you, and it fits right the first time.
Built to fit the factory mount on your stick.
Tough 13" thumb uses two ¾" laser-cut steel tines.
We offer solid, or greaseable cross-drilled main pins for this kit
Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competitors.
Kit comes standard with a custom 2.5" bore welded hydraulic cylinder with a steel line to get the hoses out of harm's way.
Protected grease fittings on all pivot points and uses 4140 hardened steel pins.
Includes gates hoses to connect to the factory hardlines.
Flat-faced couplers are not included but are available if you'd prefer to use quick connects.
$1,595.00
This complete kit fits Bobcat E32 and E35 mini-excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
OEM-style thumb with two laser cut ¾" steel tines and is 13" wide. Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competition.
Custom 2.5" bore hydraulic cylinder to fit your factory mount located on the stick.
We use hardened steel pins, and the thumb has protected grease fittings on all pivot points.
NOTE: THIS THUMB WILL NOT WORK WITH THE EXTENDABLE BOOM MODEL.
PLEASE LET US KNOW IF YOU HAVE THE LONG ARM OPTION AS LONGER HOSES ARE NEEDED.
This complete kit fits Bobcat E42-E45-E50-E55-E60 mini excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
OEM-style thumb with two laser cut ¾" steel tines and is 13" wide. Crossbar support tubes go through the tines and welded on both sides, unlike some of our competition.
Custom 2 1/2" bore hydraulic cylinder to fit your factory mount located on the stick.
We use hardened steel pins, and thumb has protected grease fittings on all pivot points.
This complete kit fits Bobcat 337 and 341 mini excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
OEM-style thumb with two laser cut ¾" steel tines and is 13" wide. Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competition.
Custom 2 1/2" bore hydraulic cylinder to fit your factory mount located on the stick.
We use hardened steel pins, and thumb has protected grease fittings on all pivot points.
This complete kit fits John Deere 30G 35D 35G mini excavators using the John Deere factory wedge coupler. If you do not use the John Deere factory wedge coupler, please contact us to make sure we get the right thumb for you, and it fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
NOTE: THIS KIT IS FOR MACHINES THAT HAVE THE MOUNT ON THE STICK FOR THE HYDRAULIC CYLINDER. IF YOU DO NOT HAVE THE MOUNT, SEE OTHER KIT THAT INCLUDES THE MOUNT.
Features:
This thumb uses two Laser cut ¾" steel tines and is 13" wide.
The crossbar support tubes go through the tines and welded on both sides, unlike some of our competition.
Custom 2.25" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb has protected grease fittings on all pivot points.
PLEASE LET US KNOW IF YOU HAVE THE LONG ARM OPTION AS LONGER HOSES ARE NEEDED.
Luke –
Well made thumb. Strong hydraulic cylinder. Literally a plug and play type kit. This seller responds quickly. I definitely recommend this seller and hydraulic thumb kit. Shipped quickly as well.