Free ground shipping to the lower 48 US States on most mini-excavator thumbs!
This complete kit fits Bobcat E26 mini excavator using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
.
OEM-style thumb uses two Laser cut ¾" steel tines and is 13" wide.
Our crossbar support tubes go through the tines and welded on both sides, unlike some of our competition.
Custom 2.5" bore hydraulic cylinder to fit your factory mount located on the stick.
We use hardened steel pins, and thumb has protected grease fittings on all pivot points.
NOTE: THIS THUMB WILL NOT WORK WITH THE EXTENDABLE BOOM MODEL.
PLEASE LET US KNOW IF YOU HAVE THE LONG ARM OPTION AS LONGER HOSES ARE NEEDED.
$1,495.00
Great for ripping frost, roots, brush, stumps, and more, the Kubota frost ripper is 28" long from the mounting plate to the tooth tip and uses a 1.0" thick AR400 steel shank and is for the Kubota Quick Attach. It comes with a standard replaceable tooth. This item weighs approximately 115 pounds.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Cost $1095 Free ground shipping to the lower 48 US States
This kit comes with everything needed to install a thumb on your Bobcat machine and get to work.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Appropriate for Bobcat 325, 328, 329, 331, 334, 425, and 430 mini excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and it fits right the first time.
This OEM-style thumb uses two laser cut ¾” steel tines and is 13" wide.
Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competitors.
Custom 2.5" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
Kubota KX161-KX057-U45-U48-U50-U55 Hydraulic Pin-on Excavator Thumb w/ Hoses
This complete thumb kit fits Kubota KX71, KX91, KX121, KX033, KX040, and U35 mini excavators using the Kubota factory quick attach system. If you do not use the factory Kubota quick attach, please contact us to make sure we get the right thumb for you, and it fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Features:
Tough 13" thumb uses two ¾" laser-cut steel tines.
Crossbar support tubes go through the tines and welded on both sides, unlike some of our competitors.
Kit comes standard with a custom 2.5" bore welded hydraulic cylinder with steel line to get the hoses out of harm's way and built to fit the factory mount on your stick.
Protected grease fittings on all pivot points and uses 4140 hardened steel pins.
Includes gates hoses to connect to the factory hardlines.
Flat-faced couplers are not included but are available if you'd prefer to use quick connects.
We offer solid, or greaseable cross-drilled main pins for this kit.
Takeuchi TB135 Hydraulic Pin-on Excavator Thumb Kit
This complete kit fits Takeuchi TB035 and TB135 mini excavators using Tag buckets or Tag couplers. If you do not use the Tag buckets or Tag couplers, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
THIS KIT IS FOR MACHINES THAT DO NOT HAVE THE MOUNT FOR THE CYLINDER ON THE STICK. THE MOUNT COMES IN THE KIT AND HAS TO BE WELDED ON.
This thumb uses two Laser cut ¾" steel tines and is 13" wide.
The crossbar support tubes go through the tines and are welded on both sides, unlike some of our competition.
Custom 2.25" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
satinath –
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries,