Free ground shipping to the lower 48 US States on most mini-excavator thumbs!
Great for ripping frost, roots, brush, stumps, and more, the Kubota frost ripper is 28" long from the mounting plate to the tooth tip and uses a 1.0" thick AR400 steel shank and is for the Kubota Quick Attach. It comes with a standard replaceable tooth. This item weighs approximately 115 pounds.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Cost $1095 Free ground shipping to the lower 48 US States
$1,095.00
This kit comes with everything needed to install a thumb on your Bobcat machine and get to work.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Appropriate for Bobcat 325, 328, 329, 331, 334, 425, and 430 mini excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and it fits right the first time.
This OEM-style thumb uses two laser cut ¾” steel tines and is 13" wide.
Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competitors.
Custom 2.5" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
This kit comes with everything needed to install a thumb on your Bobcat machine and get to work.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Appropriate for Bobcat 325, 328, 329, 331, 334, 425, and 430 mini excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and it fits right the first time.
This OEM-style thumb uses two laser cut ¾” steel tines and is 13" wide.
Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competitors.
Custom 2.5" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
This complete kit fits Bobcat 335 and 435 mini excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
TOEM-style thumb with two laser cut ¾" steel tines and is 13" wide. Crossbar support tubes go through the tines and welded on both sides, unlike some of our competition.
Custom 3" bore hydraulic cylinder to fit your factory mount located on the stick.
We use hardened steel pins, and thumb has protected grease fittings on all pivot points.
This complete kit fits John Deere 30G 35D 35G mini excavators using the John Deere factory wedge coupler. If you do not use the John Deere factory wedge coupler, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
THIS KIT IS FOR MACHINES THAT DO NOT HAVE THE MOUNT FOR THE CYLINDER ON THE STICK. THE MOUNT COMES IN THE KIT AND HAS TO BE WELDED ON.
This thumb uses two Laser cut ¾" steel tines and is 13" wide.
The crossbar support tubes go through the tines and are welded on both sides, unlike some of our competition.
Custom 2.25" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
PLEASE LET US KNOW IF YOU HAVE THE LONG ARM OPTION AS LONGER HOSES ARE NEEDED.
