Free ground shipping to the lower 48 US States on most mini-excavator thumbs!
This complete kit fits John Deere 26G and 27D mini excavators using the John Deere factory wedge coupler. If you do not use the John Deere factory wedge coupler, please contact us to make sure we get the right thumb for you, and it fits right the first time.
This OEM-style thumb uses two laser cut ¾” steel tines and is 13" wide.
Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competitors.
Custom 2.5" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
$1,495.00
This complete kit fits John Deere 26G and 27D mini excavators using the John Deere factory wedge coupler. If you do not use the John Deere factory wedge coupler, please contact us to make sure we get the right thumb for you, and it fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
THIS KIT IS FOR MACHINES THAT DO NOT HAVE THE MOUNT FOR THE CYLINDER ON THE STICK. THE MOUNT COMES IN THE KIT AND HAS TO BE WELDED ON.
This thumb uses two Laser cut ¾" steel tines and is 13" wide.
The crossbar support tubes go through the tines and are welded on both sides, unlike some of our competition.
Custom 2.25" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
PLEASE LET US KNOW IF YOU HAVE THE LONG ARM OPTION AS LONGER HOSES ARE NEEDED.
This complete thumb kit fits Kubota KX018-KX41-KX61-U15-U17-U20 mini excavators using the Kubota factory quick attach system. If you do not use the factory Kubota quick attach, please contact us to make sure we get the right thumb for you and fits right the first time.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
9 1/2" thumb with two laser-cut ¾" steel tines.
Crossbar support tubes go through the tines and welded on both sides, unlike some of our competition.
Custom 2" bore hydraulic cylinder with steel line to get the hoses out of harm's way and built to fit the factory mount on your stick
Thumb has protected grease fittings on all pivot points and uses 4140 hardened steel pins.
This kit includes Gates hoses to connect to the factory hardlines. Flat-faced couplers are not included but are available if you'd prefer to use quick connects.
We offer solid, or greaseable cross-drilled main pins for this kit.
This kit comes with everything needed to install a thumb on your Kubota machine and get to work.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Appropriate for the Kubota KX71, KX91, KX121, KX033, KX040, and U35 mini excavators using the Kubota factory quick attach system. If you do not use the factory Kubota quick attach, please contact us to make sure we get the right thumb for you, and it fits right the first time.
Built to fit the factory mount on your stick.
Tough 13" thumb uses two ¾" laser-cut steel tines.
We offer solid, or greaseable cross-drilled main pins for this kit
Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competitors.
Kit comes standard with a custom 2.5" bore welded hydraulic cylinder with a steel line to get the hoses out of harm's way.
Protected grease fittings on all pivot points and uses 4140 hardened steel pins.
Includes gates hoses to connect to the factory hardlines.
Flat-faced couplers are not included but are available if you'd prefer to use quick connects.
This kit comes with everything needed to install a thumb on your Bobcat machine and get to work.
All components are fabricated in Georgia with steel made in the USA, which means we can get it shipped to you in about three days - not three weeks.
Appropriate for Bobcat 325, 328, 329, 331, 334, 425, and 430 mini excavators using the Bobcat factory X-Change system. If you do not use the factory Bobcat X-Change system, please contact us to make sure we get the right thumb for you and it fits right the first time.
This OEM-style thumb uses two laser cut ¾” steel tines and is 13" wide.
Crossbar support tubes go through the tines and are welded on both sides, unlike some of our competitors.
Custom 2.5" bore hydraulic cylinder to fit your factory mount located on the stick.
4140 hardened steel pins and thumb have protected grease fittings on all pivot points.
